Acer Aspire V5-571 laptop screen replacement procedure
Replacing matrix on a laptop is not a difficult task these days, but nevertheless there are some things you need to know. As you might have guessed present article is yet another manual for the new Acer Aspire V5.
For this procedure, you will need the following tools:
- Cross screwdriver;
- Plastic guitar picks.
The first step is to cut the notebook power supply (remove the battery). This step is mandatory, because the matrix is constantly supplied with 18 volts, and the moment you connect the new matrix, all the electronics might burn.
Then we need to open the screen frame-cover. Gently begin to open the frame-cover at the angles using the pick. The cover is not secured by any bolt and is only attached with snaps. One must be cautious not to damage any of them.
Now unscrew matrix bolts.
Remove the matrix and gently unhook the cable.
Now unpack the new matrix.
Connect the cable.
Now place the screen where it belongs.
Snap the frame-cover.
The procedure of replacing matrix on the laptop Aspire V5 is very simple. In future articles, however, you will see that sometimes one has to completely disassemble the laptop to get to the hinges and remove the matrix.
P.S. if you are not confident about your abilities to do this disassembly-assembly procedure, it is better to pay a visit to your local service center :)